Wacker Neuson Telehandler TH412 Operator's Manual page 204

5 Operation
Working with the pallet forks
2
1
3
5
4
6
7
Fig. 101
5-78
Picking up a load
1. Check whether the permissible load-carrying capacity
of the machine and pallet forks is appropriate for the
weight of the load.
2. Adjust the fork spacing and lock the forks.
3. Approach the material in a straight line.
4. Set the pallet forks to the required height in a
horizontal position.
5. Travel forward until the load touches the fork frame.
6. Slightly raise and tilt back the pallet forks.
7. Set the load to transport height.
BA TH412 * 06/2017 * 4512_5-11_Arbeitsbetrieb_en.fm