Wacker Neuson Telehandler TH412 Operator's Manual page 81

Adjusting the operator seat
WARNING
Accident hazard when adjusting the operator seat
during machine operation!
Adjusting the operator seat during machine operation can
cause serious injury or death.
► Adjust the operator seat before putting the vehicle into
operation.
► Ensure that the seat levers are locked into place.
Adjust the operator seat to your individual requirements,
for example to your body size and posture. This prevents
muscle tensions and fatigue during work.
Adjust the operator seat ensuring that the control levers
and pedals are within easy reach with your back against
the backrest.
BA TH412 * 06/2017 * 4512_4-1_Steuerstand_en.fm
Information
The operator seat is equipped with an operator presence
switch that prevents activating the drive if the operator is
not seated on the operator seat!
If the load on the operator seat is removed with the starter
switched on or the engine running, a warning signal
sounds after 3 seconds, and the drive is switched to
neutral after another 2 seconds.
This also applies to machine travel!
Putting into operation 4
4-7