7 Maintenance
Work to be performed by an authorized service center after 500 operating hours
Replace the oil in the transfer gearbox
Replace the oil in the axles
Perform grease lubrication according to the lubrication plan
Lubricate the cardan shaft
Lubricate with oil: all levers, Bowden cables and hinges
Check all oil/fluid levels
The following inspection intervals apply after this inspection:
7-12
BA TH412 * 06/2017 * 4512_7-1_Hinweise_en.fm
Need help?
Do you have a question about the Telehandler TH412 and is the answer not in the manual?
Questions and answers