Wacker Neuson Telehandler TH412 Operator's Manual page 32

2 Safety
Removing and fitting attachments
• Before uncoupling or coupling hydraulic connections:
- Stop the engine
- Release the pressure in the operating hydraulics
• Picking up and lowering attachments to the ground
requires special care:
- Pick up and safely lock the attachment in accor-
dance with the Operator's Manual.
- Lower the attachment only to firm, level ground and
secure it to prevent it from tipping over or rolling
away.
• Put the vehicle and the attachment into operation only
if:
- The protective equipment has been installed and is
functional.
- The connections for the lights and the hydraulic
system have been established and are functional.
• Perform a visual check of the lock after locking the
attachment.
• There must be nobody between the vehicle and the
equipment when picking up or lowering an attachment
to the ground.
2-14
BA TH412 * 06/2017 * 4512_2-1_Sicherheit_en.fm