Wacker Neuson Telehandler TH412 Operator's Manual page 322

7 Maintenance
Information on inflating the tires
WARNING
Injury hazard due to bursting tires!
Inflating the wheels can cause accidents resulting in
serious injury or death.
► Use only filling devices with calibrated pressure gages
to inflate the tires.
► When inflating the tires, ensure that no one is in the
danger zone.
Information
These instructions relate to inflating tires after loss of
pressure. Observe the prescribed inflation pressure for
the tire size of the machine
pressure table" on page 9-4.
This work may only be performed by an authorized
service center in case of a complete pressure loss.
7-68
– see chapter 9 " Tire
Inflating the tires
Preparations:
1. Park the machine on firm, level and dry ground.
2. Apply the parking brake.
3. Fully lower the loading frame to the ground.
4. Stop the engine.
Way of proceeding:
1. Unscrew the protective cap from the tire valve.
2. Position the valve connection of the filling device on
the tire valve so that it securely remains in place.
3. Pump up the tire to the prescribed pressure.
4. Remove the valve connection of the filling device from
the tire valve.
5. Screw the protective cap onto the tire valve.
Tire pressure table
Refer to chapter
Tire pressure table on page 9-4
tire pressures.
BA TH412 * 06/2017 * 4512_7-18_Reifen_en.fm
for the