YASKAWA V1000 Series Technical Manual page 280

8.6 Connecting an Option Card
Note: Gently pack wires to fit behind the left and right side of the cover into the provided recess.
5.
Connect the lead from the drive ground terminal to the same terminal as the option card lead.
The option card lead should exit through the holes provided on the underside of the drive as it gets routed passed the ground terminal.
6.
Reattach the option card cover.
280
A – Line up the tab with the mounting
hole.
Figure 8.19 Attach Option Card
E
D
A – Drive ground terminal
B – Route the lead wire on the inside of
the lower cover.
C – Ground lead
Figure 8.20 Lead Wire Connection
A – Align the tab with the mounting hole.
Figure 8.21 Reattach Cover
A
B
B – Line up the tab with the mounting
hole.
A
B
C
D – Ground lead through-hole
E – Ground lead
A
YASKAWA ELECTRIC SIEP C710606 18A YASKAWA AC Drive – V1000 Technical Manual (Preliminary)