YASKAWA V1000 Series Technical Manual page 262

7.4 Drive Cooling Fans
1.
Install the replacement cooling fan into the drive, ensuring the alignment pins line up, as shown in the figure below:
2.
Ensure the connectors are properly connected and place the cable back into the recess of the drive.
3.
Align the left and right cover tabs to install the fan cover back on the top of the drive.
Note: Ensure that the left and right tabs are locked back into place.
262
A
A – Label facing up
B – Back
Figure 7.2 Cooling Fan Orientation
A – Push the connectors together so no space remains between them.
Figure 7.3 Connectors
B
C
C – Front
A
YASKAWA ELECTRIC SIEP C710606 18A YASKAWA AC Drive – V1000 Technical Manual (Preliminary)