Cycle119: Arithmetic Cycle For Determining Position In Space; General Information - Siemens SINUMERIK 840D sl Programming Manual

Measuring cycles

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

CYCLE119: Arithmetic cycle for determining position in space

This auxiliary cycle calculates the deviations in position and angle to the active frame from 3

defined setpoint positions in space (reference triangle) and 3 actual positions, and corrects a

selected frame if necessary.

CYCLE119 is called as a subroutine by measuring cycle CYCLE997.

To allow this cycle to be used universally, its data are transferred via parameters.

CYCLE119(_SETPOINT,_MEASPOINT,_ALARM,_RES,_REFRAME,_COR,_RESLIM)

Measuring cycles

Programming Manual, Release 04/2006, 6FC5398-4BP10-0BA0

Measuring Cycles for Milling and Machining Centers

5.9 CYCLE997 workpiece: Measuring a sphere and ZO determination