Siemens SINUMERIK 840D sl Programming Manual page 296

Measuring Cycles for Turning Machines
6.3 CYCLE982 tool: Measure turning and milling tools
• Machine-related measurement, calibration
• Machine-related measurement, calibration
Programming
CYCLE982
6-20
The switching positions of the tool probe refer to the machine zero. The array for the tool
probe _PRNUM is used: _TP[PRNUM-1,...].
The switching positions of the tool probe refer to the workpiece zero. The array for the
tool probe _PRNUM is used: _TPW[PRNUM-1,...].
Programming Manual, Release 04/2006, 6FC5398-4BP10-0BA0
Measuring cycles