Requirements; Of Sw 06.04.10 And Hmi-Advanced Pcu50 Solution Line - Siemens SINUMERIK 840D sl Programming Manual

Start-up (hardware)
10.7 Upgrading measuring cycles
10.7.3 Upgrading measuring cycles for HMI-Advanced PCU50 powerline as of SW
06.03.19. and/or as of SW 06.04.10 and HMI-Advanced PCU50 solution line
10.7.3.1

Requirements

For meas. cycles SW 6.2
Transfer the following archive from the subdirectory "hmi_adv" (supplied on a floppy disk) to
the HMI using "Services", "Data in" from the floppy disk or using V.24.
CYCCUST_GR.ARC
CYCCUST_UK.ARC
JOGMCYC.ARC
MCSUPP.ARC
MCYCLES.ARC
MCYCMILL.ARC
MCYCTURN.ARC
MC_TEXT.ARC
SIEMENSD.ARC
SIEMENSE.ARC
VERSION.ARC
MCRESULT.ARC
MC_CST0.ARC
MC_CST1.ARC
With meas. cycles SW 6.3
Copy the following files from the directory "hmi_adv" in "Services" to the directory "Archive"
(\ARC):
• MC63ARC1.ARC
• MC63ARC2.ARC
• MC_CST0.ARC
• MC_CST1.ARC
Individually select and load the four archives using "Services", "Data in", "Archive" (softkey
"Start").
When loading the files MC63ARC1.ARC and MC63ARC2.ARC, the MC archive is unpacked
and the existing MC archive overwritten under \ARC\CYC\MCYC.DIR.
When the files MC_CST0.ARC and MC_CST1.ARC are loaded, the displays are unpacked in
the new and old design.
10-22
Archive for user cycles (CYCLE198, CYCLE199) German
Archive for user cycles (CYCLE198, CYCLE199) English
Archive with cycles for measuring in JOG
Archive with files for measuring result display and MZU
Archive with all measuring cycles (milling and turning)
Archive with all milling measuring cycles
Archive with all turning measuring cycles
Archive with reporting and alarm texts
Archive with info on commissioning and using measuring cycles
in German
Archive with info on commissioning and using measuring cycles
in English
Archive with files for the version display
Files for measurement result display (com files)
Displays for measuring cycle support in the new design
Displays for measuring cycle support in the old design
Programming Manual, Release 04/2006, 6FC5398-4BP10-0BA0
Measuring cycles