Pre-Setting Of The Measuring Cycle Support - Siemens SINUMERIK 840D sl Programming Manual

7.3.2

Pre-setting of the measuring cycle support

General information
A field _MZ_MASK is declared in the data block (GUD6) in which the screen forms can be
adapted:
• technological measuring conditions
• to measuring variants
The settings in the data block for the _MZ_MASK field can be changed in a screen form in
"Setup" operating area.
Measuring cycles
Programming Manual, Release 04/2006, 6FC5398-4BP10-0BA0
7.3 Measuring cycle support in the program editor (from measuring cycles SW 6.2)
Miscellaneous functions
7-31