Siemens SINUMERIK 840D sl Programming Manual page 524

Appendix
A.1 Overview of measuring cycle parameters
Central value for logging
GUD6 _PROTFORM
GUD6 _PROTFORM[0]
GUD6 _PROTFORM[1]
GUD6 _PROTFORM[2]
GUD6 _PROTFORM[3]
GUD6 _PROTFORM[4]
GUD6 _PROTFORM[5]
GUD6 _PROTSYM
GUD6 _PROTSYM[0]
GUD6 _PROTSYM[1]
GUD6 _PMI
GUD6 _PMI[0]
GUD6 _PMI[1]
GUD6 _PMI[2]
GUD6 _PMI[3]
GUD6 _SP_B
GUD6 _SP_B[0...19]
GUD6 _DIGIT
Central bits
Block Identifier
_CBIT[ ]
GUD6 _CBIT[0]
GUD6 _CBIT[1]
GUD6 _CBIT[2]
GUD6 _CBIT[3]
GUD6 _CBIT[4]
A-34
Int field for formatting for log
Number of line per page
Number of characters per line
First page number
Number of header lines
Number of value lines in the log
Number of characters per column
Separator in the log
Separators between the values in the log
Special characters for identification when tolerance
limits are exceeded
Int field for internal flags for logging
Current line number
Flag for interim output of log header
1: Log header output
Current page number
Number of log files
Int field for variable column widths
Internal flag
Integer number of decimal places
Description
Central bits
Measurement repetition after violation of dimensional difference and safe
area
0: no measurement repeat
1: measurement repeat, up to 4
Alarm and M0 for measurement repeat with _CBIT[0]=1
0: no alarm, no M0 generated
1: M0 and an alarm are generated before each repeat
M0 for tolerance alarms "oversize", "undersize", "permissible dimensional
difference exceeded"
0: no generation of M0 for the above alarms
1: generation of M0 for the above alarms
Central marker for basic dimension system of the control
0: Basic system setting is inches
1: Basic system setting is metric
Note. If _CBIT[3] and MD 10240 are not equal, the value in fields TP[ ],
_TPWW[ ], _KB[ ], _MV[ ], _CM, and _MFS are converted.
currently not assigned
Programming Manual, Release 04/2006, 6FC5398-4BP10-0BA0
60
80
1
5
1
12
";"
";#"
0
0
0
0
0
3
As-delivered
value
0
0
0
1
0
Measuring cycles