Start-Up (Hardware); Commissioning Measuring Cycles For The First Time; Requirements; Overview Of Diskette In Delivery Form - Siemens SINUMERIK 840D sl Programming Manual

Start-up (hardware)

10.1

Commissioning measuring cycles for the first time

10.1
10.1.1

Requirements

• The hardware and software requirements of the measuring cycle version have been
• The probe is functional (Functional check probe connection → see chapter 8 "Hardware,
• Before beginning start-up, the existing state should be archived; if necessary now export
10.1.2

Overview of diskette in delivery form

Below you will find an overview of the folder structure of diskettes when delivered for
measuring cycles as of SW 6.3. The content of the individual folders is not detailed. More
information in the content can be found in the SIEMENSD.TXT / SIEMENSE.TXT file.
The folder structure shown is not a statement on the assignment of specific diskettes.
However, you can generally assume an ascending order, beginning with "Diskette 1".
\cycles
\cycles\cyp_file
\cycles\deu
\cycles\eng
\cycles\spf_file
\define
Measuring cycles
Programming Manual, Release 04/2006, 6FC5398-4BP10-0BA0
fulfilled (see chapter 8 "Hardware, software and installation").
software and installation").
series start-up archive.
Notice
Heed the information on measuring cycle start-up in connection with ShopMill / ShopTurn
in file SIEMENSD.TXT / SIEMENSE.TXT!
Measuring cycle programs (turning and milling)
Files for version display in HMI
User cycles program - comments in German
User cycles program - comments in English
individual cycle programs
Data blocks, definitions for measuring cycles
10
10-1