Siemens SINUMERIK 840D sl Programming Manual page 314

Measuring Cycles for Turning Machines
6.3 CYCLE982 tool: Measure turning and milling tools
Parameter
Parameter
_MVAR
_MA
_STA1
_CORA
Additional parameters _VMS, _TZL, _TDIF, _TSA, _FA, _PRNUM, _EVNUM and
_NMSP also apply.
See also
Defining parameters (Page 2-2)
Result parameters (Page 2-4)
Variable measuring velocity: _VMS (Page 2-14)
Tolerance parameters: _TZL, _TMV, _TUL, _TLL, _TDIF and _TSA (Page 2-15)
Measurement path: _FA (Page 2-16)
Probe type, probe number: _PRNUM (Page 2-17)
Empirical value, mean value: _EVNUM (Page 2-18)
Multiple measurement at the same location: _NMSP (Page 2-19)
6-38
Data type Meaning
2 or xxx02 Measure tool automatically (machine-related)
12 or xxx12 Measure tool automatically (workpiece-related)
More precise parameterization for milling tools is entered in the
3rd to 5th digits of _MVAR.
1, 2 Measuring axis
REAL For milling tools: Start angle
REAL For milling tools:
Correction angle setting after reversal
(for measurement with reversal only _MVAR=xx1x1)
Programming Manual, Release 04/2006, 6FC5398-4BP10-0BA0
Measuring cycles