Two-Point Measurement - Cycle_994 - Siemens SINUMERIK 840D sl Programming Manual

7.2.4.17

Two-point measurement - CYCLE_994

With CYCLE_994
Softkeys
CYCLE994 can be parameterized.
Parameter
Parameter
_MVAR
_SETVAL
_MA
_TNUM
_TNAME
_KNUM
_SZA
_SZO
_PRNUM
Measuring cycles
Programming Manual, Release 04/2006, 6FC5398-4BP10-0BA0
7.2 Measuring cycle support in the program editor (up to measuring cycles SW 5.4)
→
Type Value
INTEGER 1, 2
REAL
INTEGER >0
INTEGER ≥0
STRING
INTEGER ≥0
REAL
REAL
INTEGER >0
→
Meaning
Measuring variant
Setpoint
Number of measuring axis 1, 2, 3
Tool number for automatic offset
Tool name with active tool management
Offset number
D number for measurement/ZO number for calculating zero
offset
Protection zone on workpiece, 1st axis (abscissa)
Protection zone on workpiece, 2nd axis (ordinate)
Probe number
Miscellaneous functions
7-23