Measuring Cycles for Milling and Machining Centers
5.7 CYCLE998 workpiece: Angle measurement and ZO determination
Parameter
_OVR [23]
_OVR [28]
_OVR [30]
_OVI [0]
_OVI [2]
_OVI [5]
_OVI [7]
_OVI [9]
_OVI [11]
1) for measuring variant _MVAR=x00106 only
5.7.2
1-angle measurement
5.7.2.1
General information
Function
Using this measuring cycle and the _MVAR=x0x105
measuring variants, it is possible to determine the angular position of a surface in the plane
of the workpiece coordinate system.
This can be used to determine and correct the rotation component in the zero offset (ZO,
frame) of the workpiece in the plane.
The rotation is corrected in such a way that the real position of the surface (actual value)
adopts the required set angle (_STA1) in the workpiece coordinate system when the
corrected ZO (frame) is used.
The ZO to be corrected is specified in coded form with variable _KNUM >0.
5-98
Data type
Result
REAL
Offset value angle about 3rd axis of the plane
1)
REAL
Safe area
REAL
Empirical value
INTEGER
ZO number
INTEGER
Measuring cycle number
INTEGER
Probe number
INTEGER
Empirical value memory number
INTEGER
Alarm number
INTEGER
Status offset request
1)
Programming Manual, Release 04/2006, 6FC5398-4BP10-0BA0
Measuring cycles