Futher Connection Possibility On The Field Bus With The Sub-D Plug - Festo CPV -GE-DN2-8 Electronic Manual

1. Installation

1.3.7 Futher connection possibility on the field bus with the Sub-D plug

Pin DeviceNet
1 n.c.
2 CAN_L
3 0 V bus
4 n.c.
5 BUS screening
6 GND optional
7 CAN_H
8 n.c.
9 24 V bus
1 5
6 9
(View towards connection on the CPV Direct)
Fig. 1/16: Pin assignment of the field bus interface (Sub-D plug)
Festo P.BE-CP-DN2-EN en 0107NH
After removing the micro style or open style connection, you
will find a 9-pin Sub-D plug on the upper side of the CPV
Direct.
This connection serves as a further connection to the field
bus (supply and continuation). Connect the CPV Direct with
the Sub-D socket from Festo type FBS-SUB-9-BU-2x4pol.
Please note
Please note that only the Festo socket conforms with
protection class IP65.
Before connecting the Sub-D sockets of other manufac-
turers:
S replace the two flat screws by bolts (part no. 340960).
Designation
not connected
CAN Low
Power supply to bus interface
not connected
Capacitive connection to housing
-
CAN High
not connected
Power supply to bus interface
Festo Sub-D socket
(IP65)
-
A/L
GND
-
Cable clip
-
B/H
-
V+
1-21