Power-On Self Test - Xerox 6060 Hardware Installation And Facts

INSTALLATION
Power-on Self Test
INSTALLATION
15.
Locate the screen's brightness and contrast
controls.
If you have a partial page monochrome
display, they will be located at the back of
the display, as shown in Fig. 1-22.
If you have a full-page display, they will be
located at the front of the unit, as shown in
Fig. 1-24.
If you have a color display, they will either
be located at the back of the display, as
shown in Fig.
1-22,
or on the sides of the
display, as shown in Fig.
1-23.
~~r
Figure 1-22 . Location of brightness and contrast controls.
C ll'II.AUII;
CONT"dT
Figure 1-23. Location of brightness and contrast controls.
1-19