Xerox 6060 Hardware Installation And Facts page 23

INSTALLATION
INSTALLATION
• Tighten the screws on either end of the plug
to secure the connection. Take care not to
overtighten them.
\ a:mmmmm
~
/
e e
Figure 1-17. Connecting the full-page power cord.
IO.Connect the full-page display's power cord to
the processor.
. Locate the display's power cord. (It is shorter
and a lighter shade of gray than the
processor's power cord.)
• Locate the power socket in the lower right
corner of the rear of the display unit (Fig. 1-
17). Insert the female plug into this power
socket, and the male (pronged) plug into the
power socket on the rear of the processor
(Fig. 1-17).
. Press both plugs firmly into place.
Caution: Never plug the display's power
cord into a wall outlet; always plug
1t
into
the processor.
1-15