Xerox 6060 Hardware Installation And Facts page 135

PRINTERS
Models P 12 & P 32CQI Dot Matrix Printers
PRINTERS
The Models P 12CQI and P 32CQI Printers are
identical in performance. The only difference
between the two models is carriage width and
number of characters possible on a print line. To
use either printer model:
. Plug the printer cable into the connector
marked "Parallel" on the back of the
processor, using a "parallel" cable. You can
order parallel cables either from your local
Xerox/Diablo sales representative or directly
from Diablo.
. Check to be sure the print attribute switches
are set exactly as illustrated on the next
page.
The print attribute switches on both printer
models are located to the right of the internal
control panel, and are hidden when the top
cover is closed.
Switches
S01-S04
Figure 3-12. Switch location for P 12CQI & P 32CQI Printers
3-27