MOVING
MOVING
9.
If you have saved your cardboard insert(s)
,
put
them back into the floppy disk drive(s).
Figure 6-5
.
Replace the cardboard inserts.
10.
Unplug the main power cable from its power
source.
11.
Disconnect all plugs from the backs of the
units.
12.
Wrap the cables to protect the
plugs.
13
.
Tape the cables to the units with masking or
filament
tape.
14.
If you are moving your system a short distance
(i.e., from one room to another), move each unit
separately.
6-5