Installing The Rigid Disk Confidence Test From Floppy Disks - Xerox 1186 Hardware Installation

4. NEW SYSTEM CHECKOUT
Installing the Rigid Disk Confidence Test
from Floppy Disks . . ,
I
JO
5. Press the F2 key within 30 seconds after the
boot icons appear. This initiates a normal boot
from the floppy disk. After the boot completes,
the following message appears on the screen:
Enter any key
to
continue.
6. Time parameters will have to be entered at this
time; type? if you are unsure of the
parameters. Press
<
RETU RN
> .
7. Proceed to
II
Running the Rigid Disk Confidence
Test", below .
•
Atr<U)(.
I
USb HAKUVVAKt IN::> lALLA IIUN, L Y KiL KtLCA)c