Xerox 6060 Hardware Installation And Facts page 115

PRINTERS
620
w/
SPI Printer
PRINTERS
To use the 620 w/ SPI ( with Serial Printer
Interface) printer:
Plug an RS-232 cable with a modem
eliminator into the connector marked
"Serial" on the back of the processor. You
can order RS-232 cables either from your
local Xerox/Diablo sales representative or
directly from Diablo. The modem eliminator
(also called a "null modem" or "'direct connect
cable") is a common computer part which can
be found at most computer stores, or ordered
directly from Xerox.
. Check to be sure the operating mode
switches are set exactly as illustrated on the
next page.
The operating mode switches for the 620 w/
SPI printer are located to the left of the
external control panel, and are covered when
the front cover is in place.
Switches
Figure 3-3. Switch location for 620 wl SPI Printer.
3-7