Xerox 6060 Hardware Installation And Facts page 122

PRINTERS
630 API Printer
(continued)
3-14
• Press F9-Accept this Configuration.
• Press FlO-Return to Main Menu.
~
The
Configur Main Menu will be displayed.
• Press F4-Reroute Devices. The Reroute
Devices Menu will be displayed.
• Press F3-Redirect Printer. The Redirect
Printer Menu will be displayed.
• Press F2 until it displays Serial Port 1.
• Press F9-Accept this Configuration .
• Press FlO-Return
to
Reroute Menu. The
Reroute Devices Menu will be displayed.
• Press FlO-Return to Main Menu.
The
Configur Main Menu will be displayed.
·...._.-
• Press F9-Activate Changes. The Configur (".
Activate Menu will be displayed.
Note: If you have a dual floppy system, save the
changes on the MS-DOS "Boot" Disk.
• Check to be sure F2 on the Configur Activate
Menu is set to the correct destination drive.
• Press F4-Save and Activate.
PRINTERS