Xerox 6060 Hardware Installation And Facts page 20

INSTALLATION
1-12
Figure 1-14. Connecting the color display power cord.
7.
Connect the color display's power cord to the
processor.
• Locate the display's power cord. (It is shorter
and thinner than the processor's power cord.)
• Insert the female plug into the power socket
on the back of the display unit, and the male
(pronged) plug into the power socket on the
rear of the processor(Fig. 1-14).
• Press both plugs firmly into place.
• Go
to Step 11 on p. 1-16.
Caution: Never plug the display's :power
cord into a wall outlet; always plug 1t into
the processor.
INSTALLATION
( \