Xerox 6060 Hardware Installation And Facts page 29

INSTALLATION
INSTALLATION
17.
The On/Off switch is located above the power
cable sockets on the back of the processor.
- Turn the system on. Your screen will display
information similar to that shown in Fig. 1-
26.
- Adjust the screen's brightness and contrast
to a level that youfind comfortable to view.
Resident Diagnostics
Rev 1.1
CPU (i8086) Pass
ROM Module Pass
DMATimer
Pass
DMAControl Pass
Interrupts
Pass
512kbRAM Pass
RT Clock Pass
Fixed Disk Not Present
Floppy(A:) Not Ready
Primary Boot-Strap . ..
Primary Boot-Strap DISK READ ERROR.
Figure 1-26. Successful Power-on Self-Test.
Note: The blinking
DISK READ ERROR
message
appears when there is no disk in the drive.
1-21