Formatting A Disk - Xerox 6060 Hardware Installation And Facts

DIAGNOSTICS
Formatting a Disk
4-4
If you have a new system, you will need to format(\
one or two disks before you run your diagnostic .
program. Obtain two new (or used erasable) disks '-"
and go to Step 1 below.
If you already have two formatted disks, go to page
4- 7,
Running Diagnostics.
1.
If your system is not turned on:
· Turn on your printer first.
· Turn on your processor.
2.
If your Diagnostic Disk is in drive A, the
following will display on the screen.
The XEROX Personal Computer MS-DOS
Release 1.0 -- Created 2/19/85 vr .59
Microsoft MS-DOS version 2.11
Copyright 1981,82,83 Microsoft Corp.
Command v.2.11
A> customer
After a few seconds, the following message will
appear:
= =
>
TO EXIT CUSTOMER TEST
PROGRAM DURING
TESTING, PRESS THE 'ctrl-break' KEYS
DO YOU WISH TO RUN THE TESTS IN AUTOMATIC MODE?
('O'
=
NO, '1'
=
YES)
When making selections you'll press the
which is called ENTER or RETURN.
key
DIAGNOSTICS