Xerox 6060 Hardware Installation And Facts page 47

!"*'\I
OPTIONS
OPTIONS
Edge Connector
Figure2-7. Installing the memory board.
7.
Locate the two wires connected to the back left
corner of the processor. Gently move the wires
back out of the way so you can insert the
memory board as shown in Fig. 2-7 above.
8.
Align the edge connectors over the sockets. See
Fig. 2-7.
9.
Insert the edge connectors into the sockets and
press down firmly until the board "snaps" into
place.
10.
Secure the memory board in the slot with the
screw removed earlier.
2-15