Advantage D25 Printer - Xerox 6060 Hardware Installation And Facts

PRINTERS
Advantage D25 Printer
PRINTERS
To use the Advantage D25 printer:
- Plug the printer cable into the connector
marked "Parallel" on the back of the
processor, using a "parallel" cable. You can
order parallel cables either from your local
Xerox/Diablo sales representative or directly
from Diablo.
. Check to be sure the operating mode
switches are set exactly as illustrated on the
next page.
The operating mode switches for the
Advantage D25 printer are located under the
small access cover in the center of the printer
front.
Switches
Figure 3-10. Switch location for Advantage D25 Printer.
3-23