Diablo D80If Daisywheel Printer - Xerox 6060 Hardware Installation And Facts

PRINTERS
Diablo D80IF Daisywheel Printer
3-44
To use the Diablo D80IF Daisywheel Printer:
~
Plug the irinter cable into the connector "--'·
marked Parallel" on the back of the
processor, using a "parallel" cable. You can
order parallel cables either from your local
Xerox/Diablo sales representative or directly
from Diablo.
. The D80IF Printer has a push button panel
rather than operating mode switches. (See
Fig. 3-17.) You need not change any settings
in order to operate the printer. Should you
wish to make any optional changes, consult
your printer manual.
Switches
Figure 3-17. Location of the push button panel.
PRINTERS