OPTIONS
OPTIONS
3.
Mount the frame on the wall, using the screws
that came with the kit (Fig. 2-3). If there is no
stud behind the wall where you are mounting
the frame, insert the two wall anchors into the
wall before you insert the screws.
4.
Snap the NEU into the frame (Fig. 2-4).
Figure 2-4. Snap the NEU into the frame.
5.
Locate the three-pin connector on the bottom of
the NEU (Fig. 2-5).
Fig. 2-5. Locate the connector on the bottom of the NEU.
6.
Plug the cord on the power transformer into
this connector (Fig. 2-5).
2-69