Xerox 6060 Hardware Installation And Facts page 34

OPTIONS
2-2
2.
Remove the processor's top cover.
- Stand facing the back of the processor.
- Place your hands on the top cover. Applying
r\.
pressure with both hands, give one quick push <~-
away from you. The processor cover will move
away from the back panel about
-t
inch.
Fig. 2-2. Give one quick push away from you.
- Move your hands to the sides of the top cover.
Applying pressure with both hands, lift up on
the cover with a quick pull. The sides will
release.
- Lower the back of the cover a little and begin
working the cover toward the front of the
proce~sor.
- If
you look over the top to the front of the
processor, you will be able to tell when the top
cover has cleared the disk drives. When it does,
begin lifting the cover up until it is completely
' ~
off the processor.
~
Note: If you have memory chips to install on
the memory board, turn to "How to Install
Memory Chips in Your PC", beginning on page
2-10.
OPTIONS