Xerox 6060 Hardware Installation And Facts page 89

OPTIONS
OPTIONS
T-ADAPTER
Figure 2-13. Attach a length of Thin-Cable Ethernet to
either end of the T-adapter.
16.If
you have two lengths of Thin-Cable Ethernet
ready to connect, repeat the procedure outlined
above to connect the second cable to the other
end of the T-adapter. Then go to Step 18.
If
you have one cable and a terminator, use the
same procedure to connect the terminator to the
other end of the T-adapter. (See Fig. 2-14.)
Then go to Step 18.
Figure 2-14. Connect a terminator
to
the T-adapter.
2-57