Xerox 6060 Hardware Installation And Facts page 69

~
'
.
OPTIONS
OPTIONS
Lower the front of the cover into place. Press
in on the sides of the cover as you lower them
into place, making sure the cover edges fit
inside the processor frame. See Fig. 2-6.
With hands pressing firmly against the sides
of the cover, give one quick pull toward the
rear of the processor. Make sure the sides
stay inside the processor frame.
Tighten the two screws on the back to secure
the top cover.
13.Return to Section 1, Installation, page 1-7 to
finish installing your system.
If you added a modem board to a system that
was already set up:
Connect all plugs to the back of the
processor.
Connect the power cord.
. Turn the system on.
2-37