Xerox 6060 Hardware Installation And Facts page 43

OPTIONS
OPTIONS
Figure2-l. Locationoftopcouer screws.
2.
Remove the processor's top cover.
- Stand facing the back of the processor. Place
your hands on the top cover. Applying
pressure with both hands, give one quick
push away from you. The top cover will
move away from the back panel about! inch.
Figure 2-2. Giue one quick push away from you.
- Move your hands to the sides of the top cover.
Applying pressure with both hands, lift up
on the cover with a quick pull. The sides will
release.
- Lower the back of the cover a little and begin
working the cover toward the front of the
processor.
- If
you look over the top to the front of the
processor, you will be able to tell when the
top cover has cleared the disk drives. When
it does, begin lifting the cover up until it is
completely off the processor.
2-11