Xerox 6060 Hardware Installation And Facts page 151

PRINTERS
Xerox 4045 Laser Printer
(continued)
PRINTERS
• Press
F9-Accept this Configuration.
• Press
FlO-Return to Main Menu.
The
Configur Main Menu will be displayed.
• Press
F4-Reroute Devices.
The Reroute
Devices Menu will be displayed.
• Press
F3-Redirect Printer.
The Redirect
Printer Menu will be displayed.
• Press F2 until it displays
Serial Port
1.
• Press
F9-Accept this Configuration.
. Press
FlO-Return to Reroute Menu.
The
Reroute Devices Menu will be displayed .
• Press
FlO-Return to Main Menu.
The
Configur Main Menu will be displayed.
• Press
F9-Activate Changes.
The Configur
Activate Menu will be displayed.
Note: If you have a dual floppy system, save the
changes on the MS-DOS "Boot" Disk.
• Check to be sure F2 on the Configur Activate
Menu is set to the correct destination drive.
• Press
F4-Save and Activate.
3-43