Xerox 6060 Hardware Installation And Facts page 12

INSTALLATION
1-4
5.
Remove the protective plastic wrapping.
6.
Place the processor on a desk or table.
Note: Look at the bottom of your processor to~.
locate your processor's serial number. Write this ,_/
number down and file it for future reference, as you
will need to refer to it if you should ever need to call
your service representative.
Disk Drives
Figure 1-5. Processor with dual
floppy
disk drives.
Compare the floppy disk drive(s) on your
processor with the illustration above. If you
have a hard disk system, there will only be one
floppy drive.
7.
Repeat the previous steps with the other boxes.
Note:
If
your system came with a mouse
device, be sure you keep the gray card that is
packed inside the mouse box.
Figure 1-6. Mouse and gray card.
INSTALLATION