Model P 101 Dot Matrix Printer - Xerox 6060 Hardware Installation And Facts

PRINTERS
Model P 101 Dot Matrix Printer
PRINTERS
To use the P 101 (IBM compatible) Matrix Printer:
- Plug the ,Prrinter cable into the connector
marked
Parallel" on the back of the
processor, using a "parallel" cable. You can
order parallel cables either from your local
Xerox!Diablo sales representative or directly
from Diablo.
. Check to be sure the print attribute switches
are set exactly as illustrated on the next
page.
The print attribute switches for the
P 101
Dot
Matrix Printer are located to the right of the
internal control panel, and are hidden when
the top cover is closed.
Switches
S09-S12 •
Switches
S01-S08
Switches
S13-S16
Figure 3-11. Switch location forModel P 101 Matrix Printer.
3-25