Xerox 6060 Hardware Installation And Facts page 19

Hide thumbs Also See for 6060:
Table of Contents

Advertisement

INSTALLATION
INSTALLATION
- Insert the plug (matching plug to connector)
into the connector marked
CRT
at the rear of
the processor and tighten the screws.
• Look at the end of the other plug. Notice that
it too is wider on one side. Turn the plug so
that the wider side is up (Fig. 1-12).
• Insert the plug into the connector at the
bottom left corner of the rear of the display
(Fig.
1-12).
Tighten the screws.
• Go to Step 7.
/
Figure 1-13. Connecting the color display cable.
6.
Connect the color display cable to the processor.
• Place the display on top of the processor.
• Look at the plug on the end of the display
cable. Notice that the ring around the pins is
wider on one side. Turn the plug so that the
wider side faces left, as shown in Fig. 1-13.
• Insert the plug (matching plug to connector)
into the connector marked CRT at the rear of
the processor and tighten the screws.
• Go to Step 8.
1-11

Advertisement

Table of Contents
loading

Table of Contents