Xerox 6060 Hardware Installation And Facts page 102

OPTIONS
2-70
7.
Insert the plug on the back of the power
transformer into the wall outlet. If you are
installing several NEU s at the same location,
plug the power transformer into one of the
~
outlets on a power strip (Fig. 2-6). r
1
Figure 2-6. Installing several NE Us side by side
8.
Be sure that the LEDs on the front of the NEU
light up when the power transformer is plugged
in (Fig. 2-6). If the LEDs do not light up:
• Check the wall outlet by plugging in a
working lamp.
• If the wall outlet is providing power and the
LEDs do not light up, call your service
representative.
9.
Repeat Step 1 through Step 8 for each
additional NEU that you install. If possible, ~
install any additional NEUs to the right of the
unit that has already been installed, as
illustrated in Fig. 2-6, so that your NEU s can
be labeled from left to right in numerical order.
OPTIONS