Xerox 6060 Hardware Installation And Facts page 103

/ ~
OPTIONS
OPTIONS
10.
Look at Fig. 2-7 to locate the label holder on the
wire mounting frame. Remove the clear plastic
strip from the label holder.
Note: The plastic strip is flexible and can be
removed easily if you insert your thumb nail
beneath one edge of the strip and press until it
bends in the middle.
11.
Locate the pre-printed labels that came with
the NEU kit.
12.Ifyou are instaUingonlyone NEU:
• Insert the label NEU 1 -- Master into the
label holder and replace the plastic strip.
Insert one edge of the plastic strip first, then
bend the strip so that you can insert the
other edge more easily.
• Go
to Step 18.
NEU 1-Master
Figure 2-7. Labelling a single NEU
2-71