Xerox 6060 Hardware Installation And Facts page 163

DIAGNOSTICS
DIAGNOSTICS
3.
Type the number O (to choose nonautomatic)
and press the RETURN key.
The following message will be displayed:
TESTING OPTIONS
0-EXECUTE TESTS ONCE
1-FORMAT SCRATCH DISKETTE
2-EXIT DIAGNOSTICS PROGRAM
4. Type the number 1 and press RETURN.
The following message will appear:
SELECT DISKETTE DRIVE:
0-drive 'A'
1-drive
·a·
ENTER DESIRED ACTION
5.
Type the number O and press RETURN.
The following message will appear:
INSERT DISKETTE IN DRIVE A:
PRESS 'ENTER' KEY TO CONTINUE-
6.
Remove the Diagnostic Disk.
7.
Insert a blank (or erasable) disk in the bottom
drive, close the drive, and press RETURN.
The following message will appear:
FORMATTING . ...
4-5