Xerox 6060 Hardware Installation And Facts page 76

OPTIONS
2-44
Move your hands to the sides of the top
cover. Applying pressure with both hands,
lift up on the cover with a quick pull. The
sides will release.
Lower the back of the cover a little and
begin working the cover toward the front of
the processor.
If
you look over the top to the front of the
processor, you will be able to tell when the
top cover has cleared the disk drives.
When it does, begin lifting the cover up
until it is completely off the processor.
3.
Locate the DIP switches on the ASA
Communications Adapter board. See Fig. 2-
2.
Figure 2-2. Location of DIP switches on ASA
Communications Adapter board.
4. See Chart 2-1 to determine the settings of
your DIP switches.
~~~
Right
11112Till4lfsll61171 (\
B a n k ~ ~ ~ ~
I
Chart 2-1. DIP switch settings
OPTIONS