Xerox 6060 Hardware Installation And Facts page 134

PRINTERS
Model P 101 Dot Matrix Printer
(continued)
Switch Settings ,~
-------------------------------
3-26
The P
101
Dot Matrix Printer has one 8-position
switch and two 4-position switches with labels to
identify the On/Off positions.
Starting with the 8-position switch at the far left,
set the print attribute switches as follows:
- Position switches $01 through S03 towards
the back of the printer (On).
- Position switches S04 through SOS towards
the front of the printer (Off).
501 502 503 504
sos
506 507 508
4,
ON 0~ 0~ 0~ 0~ 0~
~
.____. _ _._ _ _.__.....__........__.......____......___. F
ON ON
Set the two 4-position switches as follows:
- Look at the bank of switches identified as
DNP4. Position switch SOI towards the back
of the printer (On).
- Position switches S02, S03 and S04 on the
same bank towards the front of the printer
(Off). Position all four switches on the bank
identified as MP4 toward the front of the
printer (Off).
501 502 503 504
4,
ON OFF OFF OFF
~
F
501 S02 503 S04 .
4,
OFF OFF OFF OFF
~
._____.....____.__ .......... _ _, F
To change a switch setting, use the tip of a ball-~
point pen or small screwdriver to push the switch _
lever into the other position.
PRINTERS