Download  Print this page

Important Files In Your Op 030 Configuration Environment; Binary Configuration File - Proj.dat; Configuration Source File - Siemens SINUMERIK 840D Operator's Manual

Hide thumbs


Development Kit (EU)
4 Extending the Application Configuration
Important files in your OP 030 configuration
Binary configuration file – proj.dat

Configuration source file

The proj.dat file represents the main product of your efforts.
proj.dat contains the entire configuration of the user interface in binary
However this file does not contain the texts but only text references.
The texts are read from binary text files.
This configuration file is generated from the configuration source file
in a compiler and linker run.
Your application area source files (\proj\app\src\*.c) and the standard
user area source files (\proj\std\src\*.c) together form the configuration
source files.
The files must have the extension *.c. The syntax must conform to the
syntax defined in the following documentation:
/FBO/, PS, Configuring Syntax
The files must be stored at the path described above.
The application source files and the standard source files are stored
together in an application library and a standard library with the aid of
the compiler and the library manager.
These two libraries serve as an input for the linker, which generates the
binary configuration file (proj.dat) from them.
The configuration include file must be included in each configuration
source file.
A configuration source file with the first application window and the
preparation for a further child window is located in L:\proj\app\src\app.c.
L:\proj\app\src\templ_w.c is a template file for a child window
underneath the application window.
Please copy this template and modify the copy (see 4.5).
SINUMERIK 840D/810D Configuring the Operator Interface OP 030 (FBO) – 09.01 Edition
© Siemens AG, 2001. All rights reserved


This manual also for:

Sinumerik 810d

Comments to this Manuals

Symbols: 0
Latest comments: