Ras Information Acquisition Command-Getrasinfo; Table 7-7 Error Messages With Createdmp Command - Hitachi HF-W2000 35 User Manual

7. MAINTENANCE ACTIONS
Error message
Error: In the current settings,
memory dump file won't be saved.
Error: Free disk space is too low.
Error: Systemcall failed. (%s, %x)
 %s: Name of error-detected
function for Windows API.
 %x: Error code of Windows
API.
You do not have the privilege to
run this command. Please run this
command again on
"Administrator: Command
Prompt".
7.5.4 RAS information acquisition command—getrasinfo
INPUT FORMAT
getrasinfo [/status | /setting] [/e filename]
PARAMETER
[/status | /setting]:
This set of options specifies which type of information is subject to acquisition.
Omission of these options specifies all types of information.
 /status: Specifies the current statuses of the Equipment such as rotation of fans and
temperature inside the cabinet.
 /setting: Specifies the RAS software settings.
[/e filename]:
This set of option and parameter specifies the destination file name for storing
acquired results in text file format. Use of "/e" option always requires a file name.
Omission of this option causes acquired results to be displayed in the command
prompt instead of storing them.
< NOTE >
When the file name of an existing file is found the same as specified by "/e" option,
the existing file will be overwritten.

Table 7-7 Error Messages with createdmp Command

Explanation
Memory dump cannot be collected with the current
settings. Change the target type of memory dump to
Complete Memory Dump.
Free disk space is insufficient. Increase the free disk
space and try again.
An internal error occurred.
You do not have the Administrator privilege. Log on to
the local computer as a member of the Administrators
group and then retry the command execution. If User
Account Control (UAC) is enabled, activate the
command prompt as administrator and retry the
command execution. (Windows® 7 only)
7-24