Channel Digital Output Modules With 1 Bit Diagnostics Status Per Channel - WAGO -I/O-SYSTEM 750 Technical Description, Installation And Configuration

170 • I/O Modules
Configuration and Parameter Setting of the Modules
5.3.2.2 2 (1)-Channel Digital Output Modules with 1 Bit Diagnostics Status per
Channel
PNIO
Module type
2DA(+6 BIT O)
2DA(+6 BIT I/O),
DIA in E-PA
2DA(+14 BIT O)
2DA(+12 BIT I/O),
DIA in E-PA
2DA(+30 BIT O)
2DA(+28 BIT I/O),
DIA in E-PA
* 2DA(-2 BIT O)
* 2DA(-2 BIT I/O),
DIA in E-PA
PNIO
Module type
2DA(+6 BIT O)
2DA(+14 BIT O)
2DA(+30 BIT O)
2DA(+6 BIT I/O),
DIA inE-PA
2DA(+14 BIT I/O),
DIA in E-PA
2DA(+30 BIT I/O),
DIA in E-PA
EA Type Module type member
75x-507, 75x-522, 75x-523 (1 DO)
DO_8
DO_DIA_8
DO_16
DO_DIA_16
DO_32
DO_DIA_32
75x-507*, 75x-522*, 75x-523* (1 DO)
DO_0
DO_DIA_0
Length Bit allocation
[Bit]
7 6 5
2 2 2
2
\ - - - - - - - - - - - - - - Output - - - - - - - - - - - - - - /
2
\ - - - - - - - - - - - - - - Output - - - - - - - - - - - - - - /
2
\ - - - - - - - - - - - - - - Input - - - - - - - - - - - - - - /
Inputs
4 3 2 1 0
2 2 2 2 2
8, 16 or 32 bits are applied in the output
A1 A0
process image of the station proxy (fieldbus
coupler) by fitting a slot with these modules.
The bits 2
signal condition of the physically connected
I/O module. The bits 2
marked green are made available for the
output and / or confirmation information of
the following modules. One byte process data
qualifier (IOCS) is managed in the direction
of the I/O controller in the cyclic PROFINET
IO telegram for these modules.
8, 16 or 32 bits are applied in the input and
A1 A0
output process image of the station proxy
(fieldbus coupler) by fitting a slot with these
modules. The bits 2
are assigned with the signal condition of the
physically connected I/O module. The bits 2
to 2
available for the output and / or confirmation
information of the following modules. The
bits 2
D1 D0
with the diagnostics condition of the
physically connected I/O module. The bits
marked green are made available for the
input and / or diagnostics information of the
following module slots. Two byte process
data qualifiers (IOCS, IOPS) are managed in
the transmission direction of the I/O
controller in the cyclic PROFINET IO
telegram for this module.
Instances
PNIOdata type
Input
-
Unsigned 8-Bit
field
1
-
Unsigned 16-Bit
field
1
-
Unsigned 32-Bit
field
1
- -
Note
0 1
and 2 are assigned with the
2 7 15
to 2 , 2 or 2
0 1
and 2 in the output area
7 15 31
, 2 or 2 marked green are made
0 1
and 2 in the input area are assigned
WAGO-I/O-SYSTEM 750
PROFINET IO
Output
1
1
1
1
1
1
-
31
2