HEIDENHAIN MANUALplus 620 Technical Manual page 1527

January 2012
Start Counter is
counter running
C39 C87
C40 C88
C41 C89
C42 C90
C43 C91
C44 C92
C45 C93
C46 C94
C47 C95
MP_run
Process marker for the timer or counter
Available from NCK software version: 597 110-03.
Format: String
Input: Max. 80 characters
Identifies the timer or counter (process marker), for which the
respectively configured time applies.
Timer:
Counter:
If two or more times are configured, the parameter identifies
the first timer or counter.
Default: No entry, value optional
Access: LEVEL3
Reaction: NOTHING
MP_start
Start marker for the timer or counter
Available from NCK software version: 597 110-03.
Format: String
Input: Max. 80 characters
Identifies the start marker for the timer or counter.
Timer:
Counter:
There is no start marker for timers T96 to T999. They can be
started only through Module 9006.
This parameter is not evaluated by the control. The
PLCdesignNT development environment uses it for the
automatic generation of PLC definition files.
Default: No entry, value optional
Access: LEVEL3
Reaction: NOTHING
8.4 Operands
Enable Machine parameters
counter
C135 counter[39]
C136 counter[40]
C137 counter[41]
C138 counter[42]
C139 counter[43]
C140 counter[44]
C141 counter[45]
C142 counter[46]
C143 counter[47]
T48 to T999
C48 to C95
T0 to T47
C0 to C47
1527