HEIDENHAIN MANUALplus 620 Technical Manual page 1549

Hide thumbs Also See for MANUALplus 620:

8.6.2 Configuration of M functions

Transfer of the M

January 2012

Settings in the configuration editor

CfgPlcMStrobe

[Key name of M strobe]

If there is more than one M function number with the same transfer

parameters, the M function numbers can be defined in a parameter object.

Multiple M codes in the parameter object:

• MP_min: Code of the first M function

• MP_max: Greatest M code of the group

One M code in the parameter object:

• MP_min: M code of the parameter object

• MP_max: No entry

If MP_code is defined, the NC transfers the programmed M code in the PLC

word marker defined in MP_code and other data of the M function in the PLC

word marker defined in MP_data.

8.6 M Functions (M Strobe)