HEIDENHAIN MANUALplus 620 Technical Manual page 1588

8.11 User-Defined Cycles
OEM cycles (G5xx)
PLC-G functions
(G6xx)
1588
With the MANUALplus 620 you can realize OEM cycles. The G functions G500
to G590 are intended for this purpose. When such G functions are called,
corresponding subprograms named "_G5xx.ncs" are used, which are saved in
the TNC:\nc_prog\ncps folder.
The following must be noted for the creation of OEM cycles:
Dialogs are defined in the PLC:\resource\formdlg\g_oem.fdxml file
The dialog texts must be written in a selected language directly in the dialog
description. Language-sensitive calls via a TextID are currently not yet
possible
The dialogs can be combined with images that are independent of any
orientation. A separate image list containing all images of this function is
defined for every G function at the beginning of the g_oem.fdxml file. The
image list also includes the paths to the storage locations of every image. In
the default setting, the images are saved under
PLC:\resource\formdlg\MpE-dit\common_gfkt\...
The formats already defined in the PLC:\resource\formdlg\pformats.xml
file can be used for the parameters
The following designations can be used for parameters G500...G590: _A,
_B, _C, _D, _E, _F, _H, _I, _J, _K, _O, _P, _Q, _R, _S, _T, _U, _V, _W, _X, _Y,
_Z
It must be considered that the transfer value for #_X is transferred divided
by 2, as it usually is a diameter value.
The following G5xx programs are predefined:
G593 – Feed rate per tooth for spindle 6
G595 – Feed rate per revolution for spindle 6
G596 – Constant cutting speed for spindle 6
G595 – Rotational speed for spindle 6
In addition to the OEM cycles (G5xx), the PLC-G functions G602 to G699 can
be defined with the MANUALplus 620. Unlike OEM cycles, the PLC-G
functions do not require subprograms but are processed directly in the PLC.
The same rules as for the OEM cycles (see above) apply to the creation of
dialogs with images.
The G functions G600 and G601 are reserved for tool preselection and tools
from the magazine. The following parameters can be defined for G602...G699:
_X, _Y, _Z, _H, _Q, _C, _F, _S, _T
HEIDENHAIN Technical Manual MANUALplus 620